Search results

Jerry, do you know which model solargizer you have? The early ones only provided a high frequency pulse to help break down sulificaiton, and no meaningful charging, the later ones incorporated minimal (5 or 6 watt) solar charging in also. I also suspect that the high frequency pulse may be...

n1oty, I agree that the test procedures in the TM should be followed, but it is my understanding that the voltage regulators boards on the MEP-002a and MEP-003a work by suppressing the full output voltage from the saturatable reactor, so therefore are unlikely to be the culprit in this case, it...

Dropping off upon release from the start switch does sound to me like a problem in the voltage regulation system. In my experience the most common cause of this is bad rotating rectifier diodes, on the one hand they are cheap, on the other they can be a bit of a pain to get to and replace...

Usually when the AVR board dies the voltage goes high on these units, no voltage is more likely associated with either a bad reactor or more likely a bad rotating diode. Just to clear things up here in your description, is the voltage dropping off as soon as you release the start switch, or...

Since it did seem to start to build voltage from the field flash I suspect you may have a problem in your voltage regulation system, It could be something very simple like a loose wire or a bad connection in the push to reset AC breaker down by the front outlet (if it happens again try tripping...