Search results

I always have beer, stop on by!

That's right, so when you're done you can come do mine and I pay by the hour... In beer! Lol Pay attention to Bruce, he knows what he's pointing at!

I've never seen anything with 2 air dryers before! You may have created a ripple in the space time continuum! Just unhook the unloader line from the dryer. There should be no air coming from there until the governor hits cutout pressure. Sent from my SM-G930P using Tapatalk

60 psi is about the secondary cut out pressure. Maybe the valve is installed backwards. When the governor goes bad it usually sticks at 30 psi. Does it stay at 60 when shut down? Sent from my SM-G930P using Tapatalk

16 speeds of reverse! 2 foreward!

Ok. My brain started working again! The bellhousing bolt to the block above the cam is about a half a hole off on a small cam and big cam. Mounts look good. You could make a few more and sell them as a kit! The flywheel runout is real important on a clutch but I haven't ever mounted an...

That's not quite what I meant. I had heard a few holes don't line up in the block that have to be drilled and The dowels were different. Maybe the big cam bellhousing fits the small cam motor a little different Sent from my SM-G930P using Tapatalk

I think there is a jig to drill the bellhousing to change sae sizes. A couple of holes need moved or something. Looking good so far. When your done I need a 13 speed double over put in mine and the transfercase moved back some to accommodate! Sent from my SM-G930P using Tapatalk