Search results

Another auction purchase. Really good value IMHO.

I still have the regular heater under the dash that can be used for defrost.

The success with the Benmar cabin heater led to the installation of a coolant heater.... Benmar also made a 15k btu coolant heater; it didn't put out as much heat as my Stewart Warner 939J24 but the small size and built in pump made it very appealing. I first planned on installing it in the...

A better pic showing the general location. Yes, the outlet will be very hot. I plan on rolling a shroud to prevent inadvertent contact. The fuel filter is the one used on the multifuel flame heater. I tested this heater quite a few times before committing to the install. Once the air is out...

I installed a pickup in the tank, routed line to a pump mounted on the fuel tank support, then push lock hose to the inside of the cab.

The heater is mounted on the rear trans tunnel. The exhaust is routed out the rear. I fabricated a secure means of supporting the exhaust and routed it out behind the cab, next to the transfer case, and rear of the fuel tank.

The standard coolant heater, even when installed in the cab, really isn't quite enough so I looked at the arctic heater options. Based on the discussion on this forum, the Benmar seems to have a better track record. As it turns out, there is a 20k btu Benmar heater available from the usual...