Search results

Busy weekend with youngest son's club basketball, so not much to report. I did verify my power supply is not the problem. Disconnected the DC output to the solar controller, presto magico and it's now putting out 16.34V DC. Put 12v to the now disconnected DC feed to the solar controller...

Update: Stopped being lazy, started chasing wires. Different pin out on the AC plug. Based on the AC inputs(L, N, and GND) from the plug to the power supply . Plugged it in got nothing, but then noticed a very slight ticking noise. DC output should be somewhere in the range of 12 - 15 volts...

Does anyone have the proper wiring order for the batteries? I've got 2 yellow and 2 black sleeved wires in the battery tray. No real way to tell what is + or - and which pair goes together. Thanks in advance! Matt

Thanks, I hope jumping in a couple of batteries from work will do the trick. This unit is very different than the previously pictures units, and different from the 2 maintenance manual revisions I've found. Different motherboard (1/3 the length and no battery holder), different power supply...

I'm going to jumper in a coupe of 12v batteries from work just to test the unit. We have lots of old ones sitting around for spares and mockups. Once I prove it works I'll purchase some good ones. I wonder if one could sub in Lithium batteries in place of lead acid. Might get more amp hours...

Went through the TM, I do not have the long motherboard. This is weird. My board in the TM motherboard position is about 1/3 the length of the TM diagram Motherboard. That, and I have a separate independent solar controller down. Below the motherboard location. Do I have an upgraded version...

Okay, I'm thinking I have a modified unit. Top pic is on my unit indicating an upgrade. Middle pic is from page 8 of this thread. Clearly different motherboard area from mine with a different motherboard area and a solar charger at the bottom that is missing in the prior pic. Also, there are...

Thanks for pointing me in the right direction for the motherboard! I'll try and go through the TM as time permits. Anyone know if it will power up without the 12v batteries? Fuse is good and I have line voltage to what I assume is the power supply. Nothing inside looks disconnected and the...

Good grief! You guys rock! But seriously who sits around on Friday night working on this stuff? Oh, wait, damn, that's me on a Friday night!!! Well, I put 120V to it per the above pinout. Nothing happened, but at least nothing let the smoke out in the process. I'll find the mother board and...

loose 3.6v Li battery found in the bottom of the green case. Where is it from? And this metal panel was laying in the top storage area just loose. No 12v batteries either. Sun saver solar controller is connected but not bolted down, appears undamaged. Getting ready to put 120v AC to it. Any...

Thanks, I can work with that! Hopefully I can track down ana actual set of cords.

So, my brain says to myself, "I always get out bid"... Oops now I own a hemacool. With no power cords! Anyone have a lead on said cords? Did a bit of searching on eBay and Google without success. Otherwise looks to be in good condition. Wife and middle son made the run to Vegas for the...