Search results

Lonesouth, I welded the two extra bungs in the top. Fuel pickup is in one corner and the fuel gauge as close to the middle as I could get. There is a baffle in the middle. Had to grind the powdercoat off for the welds. Flap disk worked best and don’t get it hot. The powdercoat will melt and...

My understanding is the fuel pump itself shouldn't let the aux fuel system siphon. The check valve will make sure it doesn't siphon. I also installed a tee after the filter (with -5 cap) so I can pull fuel from the aux tank for another generator. The manual valve isolates the main generator...

You are right. It's only 6" from the tank to the generator. However my sprained ankle has me a bit behind on my work. The generator will be turned around so the front is to the front of the trailer. I do believe operating the unit will be much easier as well. Fuel tank mounting bolts need paint...

I must have ordered the same tank cause I got the same deal you did, plus a $50 voucher. Northern Tool is only 40 miles or so from the house. They stock them in the stores here but it was cheaper to buy online. One thing I noticed. Most or all of the instore tanks were pretty beat up. Bad dents...

I believe you would need to install a pump at the tank and push fuel that far. I'd be surprised if that small internal pump would draw from that far away. Pump control wires would need to be run between the generator and the pump at the tank. I understand your concern. Around here though...