Search results

Guyfang, I want to confirm something with you on this switch -34, Pg. 6-16, Change 7, Table 6-5 , shows the switch, when in position 2 , the first layer of contacts all have continuity with each other , if one contact does not have or show continuity with the other two contacts , then the...

To all, I Just spent 6 hours taking a switch apart and putting it back together again. I must tell you that the switch is a very well thought out device which commands respect to the designer of record. that said I must modify my notes that I posted last night. Alpha Notes E. Before you think...

Well, I have finally taken some time to work on the MEP- 003 3 phase /single phase 120 switch/220 switch. Pulled the control box today so I did not /do not have to stand on my head to take the switch out of the control box. It took me about 1/2 hour to disconnect and remove the bolts and...

Guyfang, Thanks for the reply on my questions pertaining to fuel hosing. I am glad I was on the right track pertaining to replacement of the old hose and rebuilding the old fittings. I have read many of your old posts dating back 5-6 years and always find a little something that I can use and...

Will do and have done today: cleaned the filters out, got as much trash , rust etc. out as possible, ran some new fuel in the unit with biocide and cleaner, and ran it over an hour to heat it up. Results of initial shake out: all fuel lines weeping and hard as a rock, put a wrench on all...

OK, I have a (alz moment ) here on my part. I was doing some more research and letting the cold and rain go away while waiting for the CRC to help loosen up the 3 phase switch. While I was checking a couple of items with my meter inside the control box and I realized that I did not have the...

Just got home , tried to move the phase switch / (AC reconnection switch) locked up solid , I will have to take off the cover and loosen the wafer switch nuts and spray as you stated. Something to do tomorrow as I am running out of light this afternoon. One thing at a time to get this back to...

I have intermittent voltage on 240 single phase voltage on L1:L0, I have full voltage on L3:L0, maybe a little over voltage , 138 volts. On L1/L0 I will get a same reading as L3:L0 for about a 0.5 second them there is no reading at all I have jab quite hard on the posts to get voltage on...