• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Keith_J

    MEP-002A/M116A2 Recovery

    Just duct the hot air and exhaust out from the generator louvers. These generators like to be a bit warm, 90-100 F, for stable frequency. Unless you are driving them very hard (over military rating), taking care of the exhaust air is more than adequate.
  2. Keith_J

    MEP-002A/M116A2 Recovery

    Yes, I have identified running noise as being on the fans and the normal diesel noise which isn't damped due to the lack of a water jacket. A lightweight "dog house" which simply drops onto the generator should shield these higher frequencies with minimal acoustic absorbing lining, probably...
  3. Keith_J

    MEP-002A/M116A2 Recovery

    This sounds :oops:INTERESTING. I was planning to make my own ASK, using fiberglass-laminated plywood to make a box cover. Draw air from the control panel area, allow plenty of area around the blower wheel and carry the exhaust air out. This should keep the electrical side cool. The box will...
  4. Keith_J

    MEP-002A/M116A2 Recovery

    The red handled thing is the slide hammer, both for driving and removing ground rods. The other thing is something for the trailer. That fuel tank is nasty, it will only continue to corrode so a good cleaning and sealing (POR kit recommended) is a must. Also cleaning all 3 fuel pumps, fuel...
Top