Search results

I have a break out panel now in service for my gas standby. I’ve done the math and with soft starts on my ac units and load shedding i will stay in the constraints of the 803. And I’m not sure what cost prohibitive means to me. My house is all smart controlled(every light, pool equipment and ac...

An ATS with load shedding is done on every whole house generator that is done around here. They spec out a 22kw a 200 amp ATS. So not Shure why you say I can’t do that with the MEP-803a??? Sent from my iPhone using Tapatalk

Not sure what part of the county your in but down here, the inspection is no way like you speak. The guy ask for no documentation and just collects your money. Sent from my iPhone using Tapatalk

Any views on this wiring https://www.zillerelectric.com/products/17-22-kw-generac-generator-wire Sent from my iPhone using Tapatalk

I’m in the building stage now. Once it is wired I will determine if load shedding is needed. According to my calculations and using soft starts on my AC I may only need my pool equipment to be disabled during running. Thanks for all the info. Sent from my iPhone using Tapatalk

Not getting a permit. It’s a portable generator. This genset will run my entire house with soft starts on my 3 AC units. Sent from my iPhone using Tapatalk

I had a generac 22kw specked for my house and they were using a 200amp ATS and everything I read is ATS must match panel main amp. I even had the code enforcement look at specs and install and they said it was good. Sent from my iPhone using Tapatalk

Yes I want to stay with copper. And my house wiring is up to spec. Thanks Sent from my iPhone using Tapatalk

I want to go with an ATS and get the control module for auto start. What 200a ATS is good on the market? What house upgrades to house grounding are you taking about? Sent from my iPhone using Tapatalk

That’s the whole point of doing it my self. Professional just google it anyway. Two electricians at work told me to google it. Sent from my iPhone using Tapatalk

I just purchased a 97 mep -803a. I will be hard wiring it to a ATS for my 200a main panel. The generator will need 100 feet of cable to the ATS. These are my questions. Do I need a breaker at the generator location upstream of the ATS? If so what amp rating? What size wire do I need to run for...