Search results

I dont understand what I need to fabricate Doghead any pics or a diagram??

So do I need to pull that entire assembly off the block?

No loss in pressure Tom the centrifuge doesn't affect it at all I was mearly stating a tm fact to another member I lose no pressure from the centrifuge at all it wouldn't work at 10 psi because of the plunger it needs almost 30psi to open the plunger it donsnt cause pressure loss I just want...

Well my first year almost 5000 miles till I took it off the road to bob I ll be putting alot more on it now its road ready. Im getting ready to move back to Florida in hopefully a few weeks and Im driving my truck down.

I got the centrifuge for free by the way Doghead so no money lost.

I always respect your opinion Doghead and thanks for clarifying that I wasnt sure if putting it in this thread was correct because I wanted to increase oil pressure but thats what you Mods are here for so thanks.

I know where it is but not what to takeoff and modify.

To remove the soot so less oil changes and engine wear and increased efficiency.I dont know what your referencing Doghead as far as the part your talking about.

It works but not sure if its spinning fast enough to do its job.

spinner ii centrifuges run the same way they just use an air operated float to force the returning oil through a smaller hose.

It doesnt starve the engine for oil it doesnt change the pressure at all its preoil filter also.

Yes that is what its for I tapped into the oil sample port.

Its universal pabiodiesel 65gph model I read a post that the oil pressure can be increased behind the turbo on the block?

I need 70 to 90psi maybe?? at 50 or 60 hot now.according to gage.

Increasing Deuce oil pressure Ok I found a post on a to turn your oil pressure up so to speak I need more oil pressure for my centrifuge no other reasons or issues searched but no luck just the 1 post.

In a couple weeks I ll be receiving a mount for the centrifuge and another drain hose I ll post a video then.

I will be powder coating the centrifuge OD green and dressing everything when I install my LDS I used 1" fittings,but would like to change the centrifuge side to 3/4" because the 3/4" floor plate bolt pattern is identical and only need to make the holes alittle bigger. I could not find any 1"...

Heres the video of it installed hopefully a mod can move it to the top. http://www.youtube.com/watch?v=2jeX4fyIZDg

Ok I wanted to update the install status for all of you. I have the centrifuge installed and working I have a video also.I am sorry its taken awhile with the weather and waiting also on PAB before putting it public,on a side note I was in ICU for a few days almost died from diabetes I had been...

Ok guys as soon as the power stops cutting out I ll post up my drain back. I ll try to get out to my truck for the actual install hopefully by this weekend.