Search results

We love it! Right now we are moving it to another trailer, that 105 is getting the rusted bed pulled and becoming a dolly. If I did it again, . . . I'd figure the "jackknife angle" and make it more than the triangle that we made. W/ ours being just a triangle there's often a bit too much gap...

I'm guessing that you mean in the beginning? That would be some basic wood filler. There were gaps between the floor planks from 30+ years of drying. I wouldn't recommend it. It's too hard and cracks from all the movement.

Lights It was time to finely get some lights that weren't AA powered, magnetic, lights. Now that we had a solar panel & good charge controller it was time to start wiring some of the lights that we'd been packing around, . . . just waiting for mounting surfaces to get built and a good...

Thanks for the appreciation. Getting it changed over was pretty easy out here. We started w/ just reg'ing it as "Historic", then I spent some time trying to track down a list of "what is required" to be an RV. After a few failed attempts at getting some real list I made my own. I figured if we...

It's the stock mounting, and yes it flexes pretty good. That's why we had to move the cab-over rack up higher, we were denting in the corners of the hard top. Now we have about 4" clearance on the corners, . . . and someday I'll do something about those dents :| Here's another one w/ her...

Been on our summer "road trip" (maybe I'll start a thread on that ;) ) and not really had time to update the build. Here's some more of what was done, The fridge in it's final, non-insulated floor, state. To make up for some of the space that we lost upgrading to the fridge I started our...

It does work and has been done before. I have not blocked any air flow, that's what the "channel" is about. It allows air to get to all the intakes, and the exit blows toward us. If the "intake" is not getting enough air, we can use the case fan to push air to the intake (kind of like a turbo...

59, I understand and agree. I'm just adding to the insulation by making an insulated space that it slides into. As far as the air flow, they are made so that the air flow exits on the side that the lid opens on. Right, it blows into the rig. They require 4" "behind", between the wall of the...

Thanks, but we are just getting to the part of the build where I can start doing the little fancy stuff. She'll now start showing her real style ;)

Zout, must say that's quite a complement coming from you. I do remember the days when there was a build thread by someone that was building on TWO at the same time, a very impressive thread! Then the holocaust happened and much inspiration and knowledge was lost to us. Those that read every post...

Yesterday while working in the truck I noted this, I have the unit set at 50deg, which means it cools down to 47deg and waits till 52deg to start again. The inside temp was reading 105. It would run for about 7 mins to reach the low of 47deg, it then took about 25 mins to warm 5degs and would...

12v / 24v fridge That's how they rate it on their spec sheet. Now that I've got it wired in to the 12v I can see the draw, it draws around 4.6-4.7 and then drops to nothing. It runs in cycles like that. Don't know the timing of the cycles, or how temps affect the cycles yet. Will know more...

Nope, AC / DC 12 or 24. We'll run it off DC most of the time. No need to be level, I think it's rated @ 1 amp draw (would have to look again), fridge/freezer. It's the style that the "expo" people have been using :)

Now it was time to get rid of the cooler, . . . no more looking for some place to get ice, or draining the water out of things that should NOT have made it down to the bottom, . . . dealing w/ moldy experiments when the cool leaves and we're still days from an ice vender. That's right, we're...

The panel has been maxing at just over 32v. They are separate and we already have been using them from back when we first added the duel alts. Unlike the kick a$$, high tech / high cost (at least for us) stuff that you do ;), we just have a couple 6v interstates wired as a 12v. Right now they...

No, and I personally wouldn't waste power on it. We're doing ok in triple digit temps by parking the rig pointed the right way, shading the roof, putting out our 12'x12' canvas shade on the southside (off the rail), running some dc fans, . . . and the occasional wet shirt (sometimes on my head...

While we were up there we cut out the cab-over part of the rack. We moved it up about 4" and welded it back in place. We then added supports between the rear of the floor in the center, and the rails on the sides. Now it looks like this, and it's way more rigid when we walk on it :) The...

Now some of the latest Upgrades, We had been having some probs w/ the cab-over rack, mostly that we did NOT have enough clearance between the hardtop and the framing of the rack. It was also starting to sag some in the middle, adding to prob #1. This was the perfect time to do some of those...

Bingo! Write-up here, Repaired

It's a dual-alt set-up, 24v & 12v. The 12volt supplies power to batts for the living space. No dead starting batts after an extended stay somewhere, even when we have the music & lights on all night, . . . for days ;)