Search results

Great info thank you very much. Mark

When we installed the new harness it had the new connector for the box. Same issue still there. Thank you for the help all good stuff. The relays under the dash are working Two of them. I will try to clean the contacts for the **** of it but have had two different known good boxes in there...

I installed a new glow plug controller that came off the same take out truck so they are a matched set. Original glow plug controller when installed had the same results so everything matches. Mark

Yes the batteries were disconnected each time anything was done. The start box was replaced with same model number (used take out) and I had a backup start box that I installed just in case I had a bad one and same issue. Thank you for the help. Mark Below is a pic on the boxes. Top pic is...

With the stater wire disconnected and switched moved to start you can hear a solenoid clicking under the dash but thats all. No gauge movement. With the starter wire hooked up and switch moved to run the starter cranks and no movement on gauges and no wait light. When switch movered to start the...

I disconnected the wire at the starter and no the gauges do not work on run. No movement at all on the amp meter even when starter was cranking. Mark

Thanks for the fast response but I did check that and they are correct. I replace the cheap key switch for the real lever switch hoping that was the problem. Power is being back fed somewhere it shouldn't. I am wondering if I may have a problem up at the alternator as a lot of wires head up to...

The story and sorry for the length. Water got into my control box as the glow would flash now and then driving along and sometime the glow light would be dim while driving. So I pull the control box and open it to find a little water in it. I replaced the control box, Installed new glow plugs...