• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Merle

    Module needed for rt 246

    Don Shipped your repaired 6200 module out today, PM sent. Have a good Thanksgiving. Merle
  2. Merle

    Module needed for rt 246

    Don You have a transmitter. Will ship your 6200 module out either tomorrow or monday. PM sent. Merle
  3. Merle

    Module needed for rt 246

    Don Transmitter module arrived, PM sent. Merle
  4. Merle

    Module needed for rt 246

    Don Will let you know when it arrives. Merle
  5. Merle

    Module needed for rt 246

    Don PM sent. Merle
  6. Merle

    Module needed for rt 246

    Don I can send you my transmitter module to see if that is your problem or you can send me your module and I can possibly repair it. Your choice Merle
  7. Merle

    Module needed for rt 246

    dls12sf Don Have you found a transmitter module yet. Merle
  8. Merle

    Module needed for rt 246

    Kurt Sounds like a great idea, but I live 140 miles from the nearest town of any size, which is Missoula, Mont. and 168 miles from Idaho Falls, Idaho. Don't get out of town much. Cut my teeth on the ARC27 in the Navy. Was in VR-1 and VP-8. Both at PAX RIVER 1961 to 1965. Merle KA7APL
  9. Merle

    Module needed for rt 246

    Kurt I downloaded the manuals from radionerds. Tried to view the schematics on the computer, turned out to be very difficult to follow schematics on computer for me being an old analog type of guy, paper schematics and manuals are the only way for me to go. Thanks for the information, I...
  10. Merle

    Module needed for rt 246

    Houston I have modulation, as I suspected another bad mic element. Transmit frequency is 437 kc high. Keep knocking them out one at a time. Merle
  11. Merle

    Module needed for rt 246

    Kurt The manual I have is TM 11-5820-399-35 and only covers the transmitter section. Merle KA7APL
  12. Merle

    Module needed for rt 246

    dls12sf Don I sent you a PM let me know what you think. Merle
  13. Merle

    Module needed for rt 246

    Wile E.Coyote Thanks for the info. My cap is on X MODE, Checked the switch it was in X MODE, changed it to normal. My generator modulation was turned off. Have audio know but is very weak. Looked at my detected output on the scope and no modulation, lots of noise could be bad microphone...
  14. Merle

    Module needed for rt 246

    Don Thanks for looking. Will have to keep looking for a manual on the receiver. I still have a few problems with my radio. Transmitter needs alignment, no modulation, and no audio output. The receiver is functional and the transmitter is functional. I have the manual on the transmitter so...
  15. Merle

    Module needed for rt 246

    Don I have the TM on the transmitter section. TM 11-5820-399-35 So we are covered there. Merle
  16. Merle

    Module needed for rt 246

    will be waiting to hear from you. Merle
  17. Merle

    Module needed for rt 246

    I am looking for the manual for the receiver section for the RT-246/524 at a reasonable price. I believe the manual is TM 11-5820-399-20, please let me know if I am correct or not. I believe the receiver in the R-442 is similar so manual TM 11-5820-409-35 would possibly work. Thanks Merle
  18. Merle

    Module needed for rt 246

    Houston we have a transmitter finally, but no audio, one step at a time. About an inch from J6204 pin one the supply voltage for the filaments the wire was was pulled or cut into, not the insulation but the wire itself. Had to have been done deliberately, The wire doesn't move there and...
  19. Merle

    Module needed for rt 246

    A9000 Thanks for the information on the A9000 Clipped HV wires. Merle
  20. Merle

    Module needed for rt 246

    Thanks kurt for the info, and dls12sf will be looking for you a module on this end and will be getting back with you. Merle KA7APL
108,696members
163,916threads
2,306,159posts
279online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks