• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. M

    Manual glow plug wiring

    Also in reading this, white smoke is an indication of low fuel pressure as well. Hard starting can be the Injector pressure regulator being plugged open causing low pressure to the injectors. Easy enough, use 9/16 and pliers to pull it out, blow it out with break cleaner, put it back in. Takes...
  2. M

    Manual glow plug wiring

    Hard wired is power wire from fuse panel to one post of single pole/single throw switch or much better high amp momentary (located at any auto store), wire from other post on switch to bottom sense post on relay. push switch, relay closes until switch is turned off or released. If the relay is...
  3. M

    Manual glow plug wiring

    The relay on the firewall usually has 3 connections on the bottom heavy post that should be Orange, heavy are Glow plug feeds, light is sense back to card. Top heavy should have a heavy red wire that goes to either the resistor bank or directly to the battery, preferably 12 gauge or heavier. If...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks