Search results

All that attention to detail is really paying off!!!

I was looking at those type of bore scopes, I bought one and it required me to give the app. access to my media (photos) AND my contact list, this gives the owners of the app access to all your contact information and stored pictures, read selling out all your friends contact information...

I did send him a PM, I did not want to publicly rake a new guy over the coals, TOBASH has no sympathy for a new guy.. ;)

Welcome to the SS forums!! Did you look up the part in the parts TM, then search for that number?? All the usual suspects carry them IE HPG and Kascar (real4wd) Quick lesson, your M1123 has a UOC (use on code) of NNN, if you look at number 18 which is the stud you seek you will see NNN as one of...

The 6.5L especially the turbo need an oil cooler, those engine have piston cooling jets in the block, it carries away a ton of heat from the pistons via the engine oil. (read like most engines and especially diesel engines the oil IS part of the cooling system) This is one of the reasons the...

Man that IS ugly :(

Rain water could have gotten in through the damaged dipstick tube or some other route, it does not take much to taint the color. Just keep an eye on the new oil.

If it were me I would not take it for a test drive or run it much at all until you get the turbo replaced or fixed, if that compressor wheel is out of balance and comes apart then you have shrapnel going into your cylinders, a little paranoid? maybe:cool:

Not to mention burns, I got a wrist watch caught between a battery terminal on the back of an alternator and a manifold back in the 70s, looked like a bulldozer had walked around my wrist for a decade or so. o_O

I was cleaning up one corner of my shop yesterday and found my set of left hand drill bits, I bought them probably 35 years ago but have never been able to find them when working on a broken bolt, I put them where i know I can find them next time.........

They generally break because the bolt was loose, should not be a big chore to remove, fingers crossed!!

It could be stuck check valve/valves