Search results

I prefer to unbond at the ground then wrap up the unused wire and safely zip tie it away. I cant imagine why what you described is happening. The only thing I can think of, is your breaking a ground connection to something that is needing it, so it was backfeeding. Disconnect it at the ground...

you have the bus bar on the bottom of the bottom board. should be riveted on. Drill rivets, remove long bar, cut, replace. mark the original orientation of the bar, it is not symmetrical. I know because I have cut off the 'wrong' end before. I used the L0-ground jumper from the load terminals...

It can draw from.the auxiliary port but I have no experience other than a 55gal drum 2ft away. I suspect the sulphur ppm is higher on hho, which is a good thing, the injection pump will love it. No auto start provisions. Everything is manual. Throttle for Hz, knob for volt adjustment, etc. you...

As long as you don't have 4 burners on the stove going on hi, with the AC, while drying clothes, and playing in the hot tub all at once, the 004 will do it. You should be fine on home heating oil. Did they change that over to low sulphur? Might need a lift pump to get it to the set's auxiliary...