Search results

error post

I'll check that out thanks for the tip. Was the battery stored inside and then used to crank the engine while still warm? Or was that a cold battery?

This makes sense. It seems like that filter could flow enough for a 30 or 60kw unit.

Thanks for pointers on the battery. Just got off phone with nappa and they knocked 8$ off the battery using 'heavy duty truck discount' so I am out the door for $65 taxes in per battery. Here is the battery I got - the napa gold filters are 50% off for net two weeks... on full price with a...

Hi Boatman, I am going to try and get my parts 803a running now as well. I was thinking about using two lower cost battery options to do this - the napa 4035/75 group 75/86 585/475 CCA Will two of these have enough amps to start the 803a?

Perfect, they are red top!

So I might need to desulfate them a bit to bring back capacity?

When I got the units they were at 12.25 each, after charging they were 13.05 ish After two days sitting they were 12.75

Hi Mike - now that I have individually charged each cell and reinstalled back into the genset - how do you feel about me trickle charging through the slave with the noco7200?

Hi guyfang, I have all the manuals downloaded and saved, have kept the hard copy ones and will probably dry out the manual and ziplock it and put it back in the box in generator. I have also saved the pdf's on an older ipad with a large screen which I plan to make my garage device (once others...

Local napa (who had all filters in stock (total cost with rotella t4 and heavy diesel truck coolant was $73 with tax. Port Huron Michigan on 24th ave.)) will sell by the foot - its about $2 per foot for the good stuff, is that a fair price, or should I order some bulk ?

Looks like I can get 8500 watts out of the scrap stove from local appliance, and I can run another 1000 thru convenience outlet with 700/1000/1500 heater.

Thanks daybreak for the confirmation, I had read that thread and thought this goop was the wet stack fallout. Looking forward to putting it into the atmosphere.

any thoughts on the sludge under the muffler, looking forward to doing the MOV!

Hello and good morning, I completed my recovery of the 803a last night. Photos to follow, she is a 'looker' as far as I am concerned. I hope she is a runner. I have fresh oil, fuel and air filters to install and then will follow procedure to start. My plan is to load test with an electric...

I'm thinking about this set - do you think the weight 1200 pounds will do it?

Hi Phil, great site you have there! What is the interest in the Canadian vehicles? Great photos!

I want to store it in garage, out of elements and move to its pad for running (about 10 feet from garage) and I have grass to cross (I do not have soft ground, gravel/sand with a bit of clay. I could also patio stone that 10 feet for a walkway/generator runway.

Hi Phill and DA - I'd like to use some pneumatic ones rated to 300 pounds each How would I mount this?