Search results

Well, yeah I must have the clock type speedo can I plug one of the two fittings on it or do I have to replace the speedo? Good suggestion on cleaning out the transfer crap. I also read on one of the people that did the transfer case swap that their drive shaft weren't long enough or too long or...

Thanks for the suggestions I finally had to remove the top cover.... but it now goes in and pulls out still a little sticky but that may just be due to design or bad oil not sure. I only saw one speedo line on the transfer case but on the back of my speedometer there's two lines does one go to...

Thought about that luckily with the help of a big hammer, and a suggestion of taking the top plate off from Simp I got it to work finally. So now I just have strip it, paint it, and put it in. Any suggestion on what would be the best oil to replace the old stuff with? There's so many to pick from.

Thanks for all your help I'm gonna mess with it some more I'll tell you how it works out.

Got it from Aldermans Used Trucks was told it was a good running take out as for trusting don't trust anyone that much but you gotta buy parts and its either take outs/rebuilts/or NOS and they all have their share of problems. Tried calling them but their parts guy is out until monday but could...

It's stuck like in the middle it won't go in but it's not in all the way and I can just barely pull it out enough if I'm pulling it full strength to make the two spin any ideas what it could be stuck on?

the shift fork rod won't even budge in or out.... is there something I'm missing or did I just get screwed?

Thanks for the response I'm actually going to go check that now.

I just got my T-1138 today and I had noticed that my shaft to the transmission doesn't turn the shaft to the rear shaft with the drum on it but the rear shaft when turned turns the shaft to that would go to the transmission is that normal? Does that mean the transfer case needs constant air to...