Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I clamped off the fuel lines before I disconnected them and filled the filter with fuel before I installed it, I got lucky and my truck just fired right up and ran. Your mileage may vary!
Agreed on the fuel filter setup, mine WAS broken so I upgraded rather than use the problematic stock unit.
As for the Doghead mod, DO IT! WHEN that relay fails it could also take out the starter, glow plug relay, and the flywheel (if the starter does not engage correctly). WHEN it fails, if you...
NO and NO. Down here in Central Texas it doesn't really get "cold", the lowest I can remember was 9 degrees F, the lowest this past winter was about 20, and that was only for a few hours so I don't think I will need a fuel heater (I hope).
As for water in the fuel, I think that is more of a...
My wallyworld does not sell them, had to go to NAPA. I thought about using the stock bracket for offset but that would have put the filter too low and there would not have been enough clearance over the valve cover to get the filter off, and I thought it would get warn that close to the motor.
I forgot to mention, I HATE the new "post-ban" fuel cans, it made filling up the filter an almost three handed operation! (I KNOW it is not yellow, I could not find a 1 gal Diesel can, had to do it wrong and use a gasoline can)
OK, my stock box type fuel filter base was leaking (reportedly from a cracked housing) and being an overall PITA so I decided to convert to a spin on type filter arrangement. I searched here and online for photos and advice on the subject and came up dry so I decided to wing it, and I think it...