Search results

Fixed! So it seems like you where right guyfang, I might have messed up without noticing because I installed the other new pickup and it ran perfectly! For extra safety I unscrewed the pickup 2 full turnes and it still runs perfect. Do you think this might cause problems? Thanks! BR

Hey guys! update! So I turned the engine using the nut on the crank pulley with a ratchet and through the hole where you would insert the JDG820 tool I inspected the flywheel tooth by tooth and there was a little ware in a few tooth but it seems like the normal starter engagement ware. Then I...

Hey 155mm, where can I get this tool? any idea? BR

Hey guys! how yall doing? I tried what you told me guyfang and nothis hits the pickup, it just puzzels me a lot.... I going to tray this week the inspection port 155mm was talking about but I dont know if it missed me or my MEP doesent have that hole... also guyfang what us S10? ive been turning...

Hey guyfang! Well the instructuons on the TM are VERY clear, i hope im not dumb enough to mess them up jaja I crewed the MPU till it bottomed out (I made sure a toothe was in the middle of the hole to have a high point) backed out one full turned and then adjusted till I got 2.3V, the tightened...

Hey! Sorry I disappeared, didn’t mean to be rude! Finding the parts and having them shipped to Mexico was a nightmare, I just received them some days ago, I didnt have any interesting updates till now... And sadly the new part broke just like the old one did, I followed the Tms instructions to...

Hey Zed! Thanks a lot for this info! ill do this ASAP! BR

I found on TM 9-6115-644-24Pold on page 139 item 4 this part number: 88-21061 Transducer, motional, can anyone confirm this is the right one? thanks! BR

Up date! Well folks, I checked the omhs, should be 800-900 and it was 0. Removed the mag pickup and simething must have hit it, Pic attached. It seems we found the problem! Now where do I get a part number??? where can I get a new one! Have great day! BR

Hey Guys! I have a MEP-805A and it cranks but wont start. One day it just stopped after a couple of hours of operation and It will turn over but wont start. there are no fault lights on and if you manually move the actuator arm it will start but you have to keep it running by moving that arm...