• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    Started my 003 for the first time since January

    You are the winner! P62C16 & P61F16 were reversed. When it became clear the there should be no voltage on the aux pump when in the run position and I had it that was a give away. A few posts back I had mentioned it would run fine it I put it in the Prime Run AUX position. The thing that is...
  2. R

    Started my 003 for the first time since January

    What about in "prime-run"? Are they all to be powered then also?
  3. R

    Started my 003 for the first time since January

    So I understand. You're saying the pump (wire) that has no voltage in the prime/run position may have in the prime/run/aux position?
  4. R

    Started my 003 for the first time since January

    87Nassaublue. The ground seems to be fine and I did try tapping on it but that didn't start it. I did not check resistance Jim. I put the wire that has voltage on the pump that I know would run. I disconnected the aux pump and it fired up and ran fine. I reconnected the Aux pump and still runs...
  5. R

    Started my 003 for the first time since January

    I feel a little silly. Upon further review here are the voltages I have and what is running Aux Pump has 24.7 volts in aux OR run position The pump on the outside of the mount has 24.7 volts but does NOT run The pump on the inside has NO voltage but it will run if I put the wire from the...
  6. R

    Started my 003 for the first time since January

    I checked and have 24.68 volts at both pumps. One runs and one does not. I assume I'll need a pump? Where is the best place to locate one? Thanks (ETA) I tested the voltage at the plugs before the connection on the back of the mount. I assume it's for grounding and not a fuse of sorts?
  7. R

    Started my 003 for the first time since January

    Okay! So here is what I found I changed all filters and screens in the pumps. When messing I noticed when I put it on "Prime-Run-Aux" I had fuel pumping but on "Prime-Run" none. None of what I did fixed the problem. It would run for 30-60 seconds and then start sputtering and shut off. After...
  8. R

    Started my 003 for the first time since January

    My seems to run fine but then runs rough and shuts off. I'm pretty sure it's starved for fuel. If I prime it seems to build some pressure and run for a short time then sputters and shuts down. I had a little white smoke when it first started but it has always done that. Goes away in 15-20...
  9. R

    Started my 003 for the first time since January

    I am going out of town for a week and wanted to be sure the wife had back up power so I went out and started the 002. It is the one connected to the house right now. I decided that since neither one had been started since mid January I'd start the 003 as well. I had the batteries topped off on...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks