• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    Electrical question on 1997 m1083

    Sounds like you may have another issue in the PDP. If you have no crank and the fuel solenoid not wanting to power up... did you get a chance to check power at the PDP test points with the switch on?
  2. R

    Electrical question on 1997 m1083

    For cable insulation repair and weatherproof electrical connections I use self vulcanizing rubber tape. It is elastic and stretches and is stored in a roll with cellophane tape to keep it from fusing itself into one big rubber ball. You pre-tension it by stretching it to half its width and...
  3. R

    Electrical question on 1997 m1083

    sounds like the cables had mechanically chafed/abraded and allowed conductor to contact frame...
  4. R

    Electrical question on 1997 m1083

    It sounds like you have a bad connection(high resistance) that is causing a voltage drop as soon as current is pulled thru it. On the left side of the fusepanel/Power Dist Panel(PDP) there are 3 metal lugs labeled ground, 12V and 24V. These are the PDP input voltage test points. i know you...
108,561members
163,815threads
2,304,775posts
1,390online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks