-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
R
2008 M1083a1 no 24v on gauge or charging
That line on pin B is for the remote alternator status LED in the dash. You should be able to see it using the lamp test button on the dash. the battery disconnect light is driven directly by the disconnect relays. So if it is on the batts are being disconnected. there are 2 ways to... -
R
2008 M1083a1 no 24v on gauge or charging
Small terminal, large terminal? What terminals are you referring to? The large gauge bolted outputs on the alt are the only outputs. if you are referring to the two smaller terminals on the voltage regulator, those are the alternator control input(forward terminal) and the rear terminal is... -
R
2008 M1083a1 no 24v on gauge or charging
Tl10c is 24v tl99c is 12v tl520 is ground tl607 is also a ground… the grounds connect to battery 3(forward outboard) neg terminal E2. there should be a diagram inside the battery box cover… -
R
2008 M1083a1 no 24v on gauge or charging
So no charge voltage at the batts, do you have any at the alt output terminals(both LED’s flashing green on the reg tells me you probably do). The A1 and A1R have a device called a LBCD, which monitors how hard the alt is working and will disconnect the battery if the alt is overloaded. So...