Search results

Please be careful with cams. Had one of our electricians killed when he goofed. Long story but they had this really bad practice of tape marking cams. Sent from my SM-G973U using Tapatalk

Do yourself a favor and use so cord or extention cords. Romex is a bitch to roll up Sent from my SM-G973U using Tapatalk

4 is a bit overkill, but it wont harm anything in your setup if you ground the generator make sure the neutral and ground are bonded together at the generator and only at the generator. Sent from my SM-G973U using Tapatalk

How about corner grounded delta? Sent from my SM-G973U using Tapatalk

more accurately 120 degrees out of phase vs 180 degrees out of phase Sent from my SM-G973U using Tapatalk

They should be, usually on these sets the 120/ 240 setting is double delta and not a low open or closed delta

Thats when you have an open or closed delta winding. line to line will be 240 all around (L1-L2, L2-L3, L3-L1) and line to ground on L1 and L3 will be 120 L2 to ground will be 208. which is your high leg or wild leg. Wild leg is more commonly used with an open delta configuration as it tends...

If you are not connecting this to an established service, bond the neutral to ground and drive a ground rod Sent from my SM-G973U using Tapatalk