• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Skinny

    Bringing the M1031 into 21st century...backup cam and cupholders

    Be sure to post up your AC build!!!
  2. Skinny

    Bringing the M1031 into 21st century...backup cam and cupholders

    Blue wire when fed 12v will automatically switch the monitor to one of the inputs as a back up cam. Blue wire should be spliced into reverse light circuit. I dont need this because my monitor is on all the time.
  3. Skinny

    Bringing the M1031 into 21st century...backup cam and cupholders

    I will say this with absolutely no political affilitation or undertone... If you did run one of those clowns with the M1031 and they didn't go down permanently, backing up and taking a second stab at it wouldn't not require a back up cam...the target is large enough.:shock:
  4. Skinny

    Bringing the M1031 into 21st century...backup cam and cupholders

    Maybe phase 2 will be a better backup cam with some added protection onto it. Right now my focus is installing my new injection pump along with some other fuel system goodies. Have to prioritize. All of you should know, the front bumper is used for mowing down zombies, or as I like to call...
  5. Skinny

    Bringing the M1031 into 21st century...backup cam and cupholders

    Interesting I was thinking about adding a second set batteries in the secm box, maybe a pair of group 31 deep cycles with an isolation switch to the main batteries. Then add an inverter. Then use a 6k to 12k btu wall a/c Of course you would need to duct everything into the cab along with the...
  6. Skinny

    Bringing the M1031 into 21st century...backup cam and cupholders

    Driving it with just the mirrors is no problem. It really comes down to parking lots and such. People just have no idea about large trucks and blind spots. They would drive underneath you to get by and then blame you. It is just great piece of mind when the gear shift goes into the R position...
  7. Skinny

    Bringing the M1031 into 21st century...backup cam and cupholders

    I think the angle of the camera pointing down would either give you a great shot of the bumper or a distant picture. The camera would need to have quite the lense on it to see everything that high. Plus the middle clearance light may interfere at night. Too many variables on this install. I...
  8. Skinny

    Bringing the M1031 into 21st century...backup cam and cupholders

    I was tired of holding my coffee cup on long excursions. Chugging it so I didn't have to hold onto it was very counterproductive and resulted in shakes worse than a 6.2 diesel. So ten bucks later from Autozone...a solution to all of my beverage holding needs. Spillmaster console twin by hopkins...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks