Search results

Ditto.

I will get back with you after I measure them. I got two guys started on the project and started working on the starter. I will have to double check and get back with you. Just shooting from the hip, they look to be about 2" bolts or so.

There is a place in nearby Seguin that overhauls large vehicle starters. Found that an A3 starter is roughly $200 bucks more than a A2 starter so we wanted to at least see if they can rebuild or get parts first. As far as the hard top install, worked out great. We went ahead and drilled the...

Well the airplane is done. Hard top front section is bolted down and with the bolts, it compressed the rubber gasket at the top of the window and made everything line up just fine. We are going to work on installing the series of bolts on the back side of the cab this weekend. Still having...

Sa-weet. Thanks for the input. Hopefully the airplane will be fixed this next week. :razz:

The guy helping me asked if it was a ballistic door panel! :grin: Told him it was just old lol. Zout...its of no consequence, I have edited my posts and am over it. No worries.

Thanks for the advice, I will drill out the window frame on the bottom and make it happen. If you look at the photo, you will see that I have about 1/2" to play with on the drive'rs side window frame before it gets to be where it needs to. However, to get the two holes to line up, looks like I...

I am having some issues getting the front part of the hard top to settle down correctly on the window frame to where it is square. I think I know why the old -A2 had the bolts drilled all of the way through the frame, but I would like to avoid doing that if at all possible. This is why I am...

The "pins" that you mention in this post....are the on the outside of the hard top or under the front "brow" where it fastens to the window? About how long are they? Our hard top that came off of our -A2 had bolts drilled through the window frame (both top and bottom of the frame) to hold down...