• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Speddmon

    Timing problem on MEP-002A

    Well, The flywheel is keyed so it's not going to be off. I doubt the cam was installed out of time either. You need to run through the TM and verify what size of timing button it takes (the button is sized to the engine block as you probably already know). After that, if you can, pull the...
  2. Speddmon

    Timing problem on MEP-002A

    I would say that the IP is off by one tooth on the cam gear from the sound of it. Get #1 cylinder back up to TDC and the PC mark lined up and see if you can get an 1/8" piece of wire through the timing hole in the IP. When the PC mark is lined up correctly and the IP has the 1/8" wire in the...
108,579members
163,837threads
2,305,123posts
1,205online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks