-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
LMTV Transmission won't engage
You start in 2nd and have 6 forward gears. 1st is low range. -
LMTV Transmission won't engage
MD3070PT trans. Wtec 2 till 97 usually unless upgraded and wtec3 98-2003ish. -
LMTV Transmission won't engage
Thats your problem. And mode is not low range it justs locks the center diff making it 50/50 awd. You have to arrow down to 1 for low range. -
LMTV Transmission won't engage
You can drive it after pressing the mode button? Or pressing arrow down till its in 1 low range? -
LMTV Transmission won't engage
I have one the spring throttle return was weak and it would idle way too high. The trans would always engage though it didnt seem to care about the rpms. I added a big spring on the engine and it fixed it. -
LMTV Transmission won't engage
You should check all the grounds but if you have good voltage and the speedo is working properly I would say it's a keypad or ECU issue. -
LMTV Transmission won't engage
Is your speedo jumpy or appear incorrect? -
LMTV Transmission won't engage
Tilt the wheel down and you can get the dash panel out without taking it off -
LMTV Transmission won't engage
Check the harness between shift pad and ecu. Clear the codes. Make sure you have good running voltage. LMTVs have lots of issues with low voltage. If that dosnt work then I would replace the shift pad. -
LMTV Transmission won't engage
Press arrow up and arrow down at once and you can see stored error codes. There is a code guide online to reference. The harness and connectors going into the trans computer located behind the keypad can come loose and cause all kinds of issues.