Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks. Also thinking of getting a plug to thread in where the stat is. Thinking it may leak coolant from the ports. Am i correct, or is that unnecessary?
Thanks. Going to do the flush and refill first, and hope that works. Will look at the fan clutch lines tomorrow, and see what i need to do for that. If necessary. Suprman: will remember you for the fan, if neither of those work. The consesus of those affected by money going out was to...
I'll check on Monday to make sure it fits, and that we're allowed to spend the money. Do i need to wire directly to the battery bank, or have you found a spare harness to attach to in the past?
I was hoping that something was defective, and I could solve it with a part. I seems that I am just running the truck under heavy load in poor conditions, (high ambient temp). I think just about everything but the garden hose is in place for us to be trickling water on the radiator. Thanks...
I have the overspeed light, but also another above, and between the tach, and speedometer. Again, pertty sure it's a high rpm warning. So do you think that it's the fan clutch that's the issue? My shutter stat has 190 stamped on it, so i think my supplier helped me out without explaining...
Do you know when the A2 stat kicks in? Just put $250ish into the new one, and probably can't send it back now that it's been used. But wish I knew it was better before I'd ordered. Any other parts better that fit on either on the A1, or A2? Have an A1 personally, and like it better for...
I told my partner, (at work). You tag line, or whatever it's called. The thing about the stupid people. His eyes lit up like he'd never heard a better idea in his life. I feel the same. Of course I needed the warning about reverse in low transfer. But I'm willing to roll the dice, and see...
Just made it home from another day of trying to avoid major catastrophy with this truck. Thank you all for your input. I was able to read it all at lunch, but didn't have good enough signal to respond. It was great to know what to keep ab eye out for. I'm running between 1200, and 1500 rpms...
Thanks Jbulach, and Scar59. I'll check on the RPMs when dispensing today. The engine overheat light does not come on. The transmission temp is close to 200. The fan seems to be operating normally. Anyway to tell if fan is on while operating without getting out to look at it? Recently...
Hi all. First time poster, hope I'm posting in the right place. Thank you all for teh information on this site. I've recently become the caretaker of an M929 that's been converted to a water truck. We've been experiencing some overheating when hauling our load slowly, ( usually not leaving...