Search results

The MS p/n as shown above - MS3106F-16-10S - would come in OD Cad Green. The picture on Digikey's website appears Black... the newer nomenclature on the part should read 'JAN MS3106F-16-10S' - the US added the JAN prefix in an attempt to stop the offshore clones - Tanner

Bjorn - If you order the connector under the p/n MS3106A-16-10S that you reference above from Digi Key, you'll receive a connector & standard "A-style" end bell, but will not get a cable clamp on the rear. You'll have to order a cable clamp separately. See left photo for MS3106A-16-10S (has 3...

If you decide to change the original connector and use a different connector, look for a contact rating per pin of at least 23 amps max... this is what the 12ga. contacts in the 3-contact connector were tested to. Tanner

Lance - I'm no expert on connectors, but have been doing this for about 6 years now - Look at http://www.peigenesis.com/pdfs/amphcsg/amphcsg41.pdf - this will show you how to order the connector under an MS prefix p/n: In the case of the 3-position MRE heater plug, you could use...

Bjorn - No, you're good on the insert fitting in the shell - this is all from the MIL-DTL-5015 (MIL-C-5015) family, and they are intermountable & intermatable, but the 97 series doesn't offer any enviromental protection - Series 97 is a basic industrial use cheaper version of military version...

Bjorn - Be aware that the Amphenol Series 97 connectors are the bottom-feeder, entry-level connector. They are not environmentally sealed against water or dirt & cannot be submerged. However, they are EMI/RFI shielded... go figure! Tanner

I've rep'd connectors for Cannon & Amphenol... you cannot get inserts separately. Crimp contacts, however, can be bought separately. If you DO, somehow, manage to get ahold of inserts from someone, they are usually leftover parts that someone is trying to ditch. Inserts are glued into the...