Search results

I needed to adjust my alternator voltage up. However my hex plug seems to be glued in, very, very well. Almost like JB weld. Is that uncommon?

I actually haven't had much time to work on the truck, so this is still on the to do list.

Rear lights are in, just need to get the harnesses loomed and run correctly

Got a few harnesses made up and run. As well as a dome light setup with white and a green map light.

Is there an alternative part that can be used for the reverse light switch? No one seems to have any in stock at a reasonable price.

It is, with the six switch source installed under the seat with the batteries. I had a long conversation with them about it being 24v compatible, and they assured me it would work great. And so far it has. Here it is rigged up to test some load with lights

Spod showed up, got it all hooked up. Now to make a whole lot of harnesses...

I went with dbskin because I was able to get 5 Gallons of it for the best price possible. As well as some dbshield sheets. It took ~3gal to do 4 coats on the entire interior of the truck, up to about the middle of the b-pillar. DB skin is a one part coating, which is nice. No mixing hardeners or...

Forgot to post the pictures of the interior. All the prep paid off. Still have lots to do to finish it up, but this was a good start.

With some modications it fits pretty darn good.

Doing some reverse engineering on a tonneau cover while the last of my interior coats dry.

All coats down. Sprayed in real easy.

First coat is down. Terrible pictures, I'll get more in the daylight when I'm not so tired

Strating the prep work to get dBSkin in. Should quiet the body vibration and resonance, and kill a lot of the road noise too.

Got a center rack fabbed up.

Finished up with my bed rug project, and they wanted some pictures to share. https://www.facebook.com/BedRug/posts/1089849861065794

Got the rear cushions made and covered.

My next item on the to-do list is a cargo cover kit. However, are Tan Cargo Covers the unicorn of them all? I cannot seem to find one at all.

It helps some. But the plan is to spray in dbSkin under it once spring comes and the weather gets nice. That should get it quieted down alot. I also have a bunch of Hush Mat to still put in.

Finished up with the BedRug fitting and got the Smittybilt seats in.