Search results

I made slits in my tube that slips over the intake tube and used the 1/2 original clamp held good

That method looks good on paper, but not sure how it would work going down the road or up a hill? :)

Repo3004 did buy one too. He was putting it on a m809 series truck I believe. It would be good to hear his input too.

I can't wait to see the real test results! You need to drive the same road at the same speed at the same sections to get true readings.

I always appreciate good sound info. You do raise some good questions. I guess we will see when Ford Mechanic gets his scoop operating.

WOW! Didn't expect that at all!

Cannoncocker I will check my supplier for a 5" to 4" reducer.

I had some question on how I built my bottom plate. This is what I did to the bottom plate. I pushed the tube up into the plate to make a dam. The tall section of the dam faces to the front. I felt it would keep rain from going right in the air cleaner, the small channel around the center...

The opening is 4 1/2 tall x 9 1/2 wide. Not sure about the math. The stock 5 ton mushroom has a 1" wide opening around the edge of the cap. As far as testing it I did this mod. Last year and drove the truck to the COMVEC show in Chester CT, the Weare Rally in NH, the Natick Show in Ma, the...

aluminum ram air scoop Hey are some better pictures of my Air scoop. I welded a piece of 5" ID exhaust pipe to the bottom plate, made some slits to let it contact with the stock clamp and painted it Carc Green. I spoke to the guys who made mine and I am going to offer them here in the...

I will get some more pictures up tomorrow night. Of the scoop, Not my fiance' :). how would you guys like to get these scoops? option one: as them come from the fabricator, you will need to weld your air cleaner clamp to it. option two: I weld the collar on to fit your air intake. option three...

I am talking to the guy who made mine to see if I can buy them in bulk for resale here on SS.

subscribed