Search results

So what I did is I got a Diesel engine compression tester off amazon that when up to a 1000 PSI. Now for the cylinder adapter, I could not find the government issue one anywhere. So I made my own by boring out a old diesel injector and tig welding the fuel supply hole and add a gauge to the...

Hey Guys, Final figure out where most of my smoke was coming from when idling. Since march I have been running a 75% used oil to 25% diesel which lower the rpms at top speed and the truck runs a lot better over all. But the smoke was still there till last week I was under the truck and...

https://www.youtube.com/watch?v=-OWBzbzqCi0&feature=youtu.be

TRUCK UPDATE The injector timing looks correct by the (Troubled Shooting Manual LDS-465-1 Multifuel engine). Also I can't see the timing being off cause I didn't have this problem before it sat around. So I cant see the timing jumping when it not moving. Also for the last few days I have...

The injectors in the truck are a two hole and the opening pressure was 2750 to 2800 psi after I cleaned them all.

That was a pic of my DIY cylinder compression tester. I bored out a old diesel injector and weld the fuel supply hole and add a gauge to the pressure top.

I was thinking of that. But if it was stuck ring when I did the cylinder compression check it would have showed up. I would think

Hey guys, So today I checked the injector pump fuel adjustment screw, and it look good. I also checked the Throttle linkage & the IP Timing they where good too. Finally I check the air breather filter & it was clean swapped it with a new one too. Now I am out of ideas what to check truck...

I didn't try to measure the injector return line

Hey guys, So today I finally got time to work on the M35a2. Removed all the injector nozzle and cleaned them. I also did a injector pop test on all of them. They all open at the pressure the (tm 9-2815-210-35) recommends and they did not drip or leak when high pressure was left on them. Then...

https://www.youtube.com/watch?v=qb-JNdE4er4

https://www.youtube.com/watch?v=40xd_H0TjLQ

frank8003 Thanks for the TM Manual Great Reading. So today I pulled out one Injector out of my spare motor in the garage and set up my Diesel Injector Test for the first time. Had to custom make a adapter from Diesel Injector Test Pump to the Injector. All works good now. Just need to pull the...

Also can so one show me where to find (TM 9-2815-210-35) I google it and could not find it. Tried here to in the manuals part and could not find it. THANKS

The last video oil was full and clean, water temp was (+/-160F) at the truck dash gauge & temp was (+/-148F) with a senor gun. The truck has clean fresh diesel fuel in it. Drained & cleaned the tank the other day when I changed out the in tank fuel pump. I have not tested, cleaned, or check the...

https://www.youtube.com/watch?v=x5N-KsKLju4

https://www.youtube.com/watch?v=Gw7chX07eQM

https://youtu.be/Tm7IrI2HWlc