-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
M813 top stop overhead questions
No, put the extension on 3 if you start at VS1-6 or A and do i3, v5. You will be setting the inj at the "top stop, zero lash" method, if the tag says .011 and .023, it should sat for inj setting TS zero lash. Bar the engine and watch, when the lever breaks, the mark will be around an inch or so...- WillWagner
- Post #7
- Forum: 5-ton and up
-
M813 top stop overhead questions
Careful, if you do it wrong, you can cause damage to parts. You should make sure the accessory drive timing is correct before you get too far into things. If you set OBC, after you set your first set of rockers, let's assume cyl 1, put a socket with a 6 or 10 inch extension on the #3 injector...- WillWagner
- Post #4
- Forum: 5-ton and up
-
M813 top stop overhead questions
You can adjust either way, IBC or OBC, If you choose OBC, at the 1-6VS mark look at the #1 and 6 cylinders. Which ever injector lever is pushed down...into the injector... and has loose valves, that is the one to start at. Torque the injector to 68-72 INCH lbs, valves at .014 and .027. If you...- WillWagner
- Post #2
- Forum: 5-ton and up