Search results

Terribly sorry for never replying to this. I hope you found a fix! If you haven't, I'd get in and start testing some things with a separate multimeter. First would be the actual voltage from your vehicle...it's possible if it's low, it probably won't allow your MSD to work correctly. As...

I would get a very similar error if I tried to do the initial self test with any cables connected. When I remove all but the DCA and serial cable, I could pass the test, then connect what I needed and it would measure just fine during the actual vehicle diagnostics. What's plugged in at the...

FKAM, I still owe you some software. It's not been forgotten about since we last spoke, I just have to borrow my room mate's computer to copy the discs and we've been alternating on who's away from the house/too busy in order to actually get those discs made. I wish I could say that tonight...

The serial port is definitely smaller. The current one, which you're looking for, uses a standard D-Sub 9 and the four-pin power like what's pictured above. The connector on the ICE Box side is a round, bayonet-locking plug. I don't have it in front of me right now to provide a picture of...

No toggle and the J7 port looks the same as mine. Looks like it's the newer hardware. You also just helped throw a hypothesis I had running: I thought that all black ICE boxes were the old versions and the green ones were the newer ones.

Since those are W2K recovery discs, you definitely have an earlier version. I think the MSD V1 used Win 2K. Most prevelant since I've been looking around have been the v2 with Win XP. Out of curiousity, does your ICE Adapter Box have the toggle switch on it to switch between NATO plug power...

More info! Most of us are probably stuck using EMS2 as our IETM viewer. If you're using anything newer than Windows XP (I sure hope you are...), you'll notice that any of the Indexes, about pages, and help sections don't work. You actually will receive an error stating that .hlp files are...

It is in PDF form (and a ghastly IETM version that's tough to navigate, unlike vehicle IETMs). I picked it off of the LOGSA ETM site. For your convenience, have it here! If you care to look, the LOGSA ETM site also has the MSD v3 TMs; however, I didn't grab them because I don't have that kit...

Got home today in time to have enough light for pictures, so it's time to deliver! Case, Closed and Opened, as-packed: Non-cable contents displayed: Assemblies, as seen above: Probe Set; ICE Interconnecting Box; MSD Backup Software Disc 1 & 2; Adapter Set, ICE Test Fittings; Data Bus Kit (mine...

Got an answer for that connector. The J7 port on the ICE adapter (that I've been calling ICE box) is designed to connect to the DPA. The -10 manual specifically states "Special Purpose Cable (PN 13580839-2) uses a 15 pin D connector to connect the DPA to the J7 connector of the ICE...

What connector? Do you mean that parallel port I mentioned? If so, the TM included with the ICE Box mentioned what it is and how to use it, I'm just not at the computer with it on it yet. If not, them all I can say is the ICE Box basically already is an analog to digital converter and in...

I just realized that I should share some usage shots of MSD-ICE kit for this thread. Nothing in this post should be new for anyone that already read the "what have you done to your HMMWV today..." thread. The setup: In the above photo, you see the second revision ICE Box (green in color...

Sure, I'll be happy to once I'm home. I'm actually working on picking up a second kit for both spare parts and as a lender unit. There's a MV museum near me that has three HMMWVs on the way and they would probably appreciate having one of these on-hand to do a bit of tuning (though I admit...

I'm assuming you have the STE/ICE-R? The one where you push buttons up and down to select a test and then run it on the box? If so, this does the same job, but it's all computer-controlled. It's setup in a pretty legacy manner, too, because all of the IETMs refer to the tests in conducts by...

Excelsior! I was able to tweak the disc a bit and successfully got the ICE drivers to install. Plugged in the main connector to the STE/ICE port and connected the ICE Box to the serial port on my laptop and was able to feed live voltage data through. I used both the straight ICE tool, and the...

So mixed news! I got the set and scoured through it... It has both CDs (1 is the OS and core OS driver disk, 2 is all of the drivers to run the actual ICE kit, Dearborn adapter, and other items related to the MSD kit.), everything is in great shape, but it's missing one cable... The good news...

Does sound like I missed out, especially if that was all in excellent condition. I just got the test set for about $205 delivered. There's still one more on eBay from the same seller. "MSD ICE" was my search to bring it up, should anyone else want one. This set should be complete with all of...

Looks like I'm going to gamble it. The price on these kits is the lowest I've seen in 6 months. Worst case, I just patiently wait for a cheap Miltope MSD v2 laptop to show up somewhere, since this kit will come with the recovery disk for one. If anyone does have any feedback still, I'd really...

I was looking at grabbing one of these, but wanted to know before I committed the money...has anyone gotten the ICE kit adapter set to work on a non-Miltope computer? The kits seem to have a basic software included with them, plus I have the HMMWV IETM that begs me to plug in an ICE Box...