Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Yep bracket is in place and also set my phone up to take a video from underneath when I started it. Both locations I ordered the bolts from came in on time so now I have a few extras as well.
The new bolts arrived today so I reinstalled the starter. Cranked it over for a few seconds with the injector pump disconnected as well as started the truck normally a few times just to test it out a little bit. So far so good so hopefully that problem is in the past!
Awesome, thanks! The bracket is also installed so I’m good there, I’ll confirm those bolts are still tight once I install the main starter bolts as well just to be sure.
No worries, I appreciate the help. O’reilys has this listed as the bolt specs. So hopefully someone has a few extra laying around and can measure to confirm.
Thread Size: M10-1.50
Length (mm): 111mm
Thanks for the reply. I have a cheap “speed out” remover which thankfully worked great. It was broken off up in the block but I was just able to reach it and back it out. So at least that part of the problem is solved!
That is a good point about the bolt lengths/shims. When I purchased the...
So somehow during the process of reinstalling my starter today one of the starter bolts broke. It was already installed and was cranking the motor over and when I got out of the truck I saw a bolt laying on the floor, it sheared off inside the block. Two questions, what size bolt are these (they...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!