Search results

I built a m923a2 that I bobbed with air ride and set up real nice, that truck I miss as it was smooth and had power. My m925a1 i do not really miss. I really like the m1078 but torn betwen the bobbed 5 and the 1078. I plan on keeping my 1078 as it is more versitlie, tons more cab room, 4x4 takes...

Turned up with no load in the truck she will continue to pull hills and not downshift. Ive seen 1200deg and rising allowing it to do its thing will lead to meltdown. ive then had 8000lbs in the bed and it will pull similarly but much happier. My point was if one is so inclined to dive into the...

Ill try to get my sources of info up. They make the special tooling due to tight working conditions and fine adjusments. If you had to res6nc the rack then you are either forced to buy the kit or take the entire intake manifold and valve body apart to wo4k through it. I made very minor...

Cut a hitch on my plasma table and mounted it up. Got a 6 pin to 7 pin whip and will mount that in as well. Ill likely wire in a brake controller as well. Possibly putting a gooseneck hitch on as well

Followed the procedure for the cat 3116 to set valves, adjust injectors and advance them. Turned up the fuel and air ratio and she hauls. 9ulls hills without downshifting which causes egts to climb. Overall its much nicer now to notnhave to work the peddle for power. Building the hitch this week

MidnightDuramax. just did Added a pyro last weekend, plan on setting the valves and resetting/advancing the injectors and turning up the motor this weekend or in the next week once I get some good baseline numbers on egts to see where I am running currently. I am also hoping to get time this...

Gears work great. Now to balance the wheels when running above 55. Gears are 3.07:1. Roof rack Iis bolted to the roof with nutserts. Now looking to put in a pyro and open her up a little. I am not sure what you mean by defroster plenumn. Its open across the windshild. I do need a new speed...

High speed gears came from primier metal buyers, I have an extra set I bought that I intend on selling. Roof rack is bolted down with nut-serts into the top of the cab, ill try to get better pictures this week.

Also replaced the water pump belt and the alternator belts. Ill list the cross reference numbers when I get a second Water pump is a Dayco 17335 or Cat 7E0744 Alternator belts are Napa premium xl 25-9580

After selling my bobbed m923a2 and getting bored, I got lucky on a m1078 out of ft drum. Said it was driven on the lot but was dead due to the cold (-40f). Got it hauled home, warmed it up to 5f and charged the batteries and she hesitated but started. Didnt have that many issues but went through...