• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. antennaclimber

    m1008 glow plug/wait light issue

    If you blow it up, Ill fix it.
  2. antennaclimber

    m1008 glow plug/wait light issue

    Try grounding the light blue wire and see if it closes the relay, if it does, measure the voltage on the GP side of the relay to see if it is getting the proper voltage. Then check to see if the light blue wire has continuity from the relay to the GP card connector, if so then you may have 2...
  3. antennaclimber

    m1008 glow plug/wait light issue

    I think dougco1 is on the right track. Disconnect the temperature sending unit that goes to the GP card and see if the Wait light comes on and the card closes the GP relay when you try to start the engine. By disconnecting the sensor, you give the card a high resistance on the sensor input to...
108,579members
163,834threads
2,305,054posts
1,137online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks