Search results

Nah i have some pics if you want me to post them up. It was for a customer who picked it up last week. Its a heim joint which is a type of ball and socket setup. The Bracket had 3 bolts in the bottom but it did not go up the inside of the frame.

center to center of 1" bolt was 44.250"

Bars all Finished. Made a world of difference. Also flexed fine. I backed it up on a hill but didnt get a pic. But like stated before frame did all the flexing lol

Yep stuff is nice. I weld most of my sheetmetal axle housings for the monster trucks with it.

that dual shield flux core wire you used on them mounts?

nice work

how you doing your frame mounts directly under the frame?

depends on you wheel base too. this is a 5 ton tractor which i set up for the m105 bed. worst case you can also build a little cradle on the bottom of the frame to jump around that stuff. i didnt do that to this truck cause customer wanted more of the look and just didn't want the wrap of the...

center to center if i remember was 44.250". couldn't go much further cause of the air tanks on the pass side. plus customer wants to be able to see the setup from the side of the truck.

what i came up with for this customers truck. God the air chamber sucked working around. but i just got enough clearence for 12" of downward travel and it doesn't hit. 1"x 1.25" heims with 2.5"x .25wall dom tube. i have to finish machining my inserts for the bar i ran out last monster truck we...

both of you have very valid points. do the springs really even move that much? the bars will let the axle move in its generic motion (backwards) but not at the full rate it really should. But how much does it move? or move at all? In a perfect world the axle should only move up and down but as...

another thing i noticed with the deuce spring hangers is on some not all but the hangers don't flex all the way due to the casting be to bulky around the hanger and shackle. If you flapper wheel it it gives the shackle more swivel . i dont have a pic here to show it, ill try when i get home

long ago when i first lifted my truck. I was surprised at how it did off road but yea not best rti candidate

i can do whatever you want. Complete kit down to nut and bolts, just brackets, just heims. whatever you would need

im bobbing a 900 series 5 ton right now and am adding traction bars. If you guys have ideas and measurements i can cut something custom out for ya. Im using 2 1/2" od x .250wall DOM tube and 1"x1.25" heims. (what we use on the monster truck upper bars) on this cusomters truck. but for 2.5tons i...