Search results

Perfect and thank you. Tony

Problem solved. Wires 172A and 190A were reversed; 172A was on S1 7 and 190A on S1 1. Last question related to glow plugs and the original problem. When I move S1 to the preheat position, it initially makes a click sound. It sounds like two energized points closing. Is it normal in preheat...

No worries. Thanks for confirming. Appreciate all the help. Rain is supposed to end around noon, so I can report back my findings/results soon. Thanks again, Tony

Guyfang, I compared your chart wire numbers and termination points to the TM schematic PDF posted here ( (2) All the TM's you need to work on the MEP-804A | SteelSoldiers ). See page 21. The wire numbers and termination points do not match. Is it possible the schematics posted at the link above...

Guyfang, I compared your chart wire numbers and termination points to the TM schematic PDF posted here ( (2) All the TM's you need to work on the MEP-804A | SteelSoldiers ). See page 21. The wire numbers and termination points do not match. Is it possible the schematics posted at the link...

Thanks Guyfang. Very helpful. Once the rain stops, I will verify S1 wiring and then report my findings (and most likely success). Thanks, Tony

thanks for the quick response. Will look it over tomorrow during daylight. Thanks again, Tony

Roger that. Per the TM schematic, locations 2, 4, 6, and 8 are hot. On mine, 4 and 8 are bridged and have wires on them. Need to trace those wires to their end points. On the other side of S1 is 1, 3, 5, and 7. 1 and 7 are bridged with a diode - need to check direction, but as I read the...

New to the forum. Bought first military generator. Excellent machine. Ran load bank last weekend. Machine ran at 61amps comfortably. This forum has been extremely resourceful. TM’s equally helpful. That said, I have a question regarding preheat. When I turn S1 to preheat, the starter engages...