• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. citizensoldier

    M1031 with Hobart G204 Welder Help

    It sounds like you might have a bad relay in the control box. Or maybe the start switch? Somewhere your loosing good power "bad connection"to the starter. Check the power output at the switch both in and out. If you have good power out of the switch trace it to the box and so on.. Starter wiring...
  2. citizensoldier

    M1031 with Hobart G204 Welder Help

    Ok so if the motor turns free I would then check all your wires and connections on the control box for corrosion. It the funny shiny box with a tube thing plugged in the top.If I remember right the power goes through that and then to the starter. Also check the ground from the battery this could...
  3. citizensoldier

    M1031 with Hobart G204 Welder Help

    Oh and that is asbestos around that exhaust pipe! Wrap it in saran rap and soak that fitting like crazy.. :mrgreen:
  4. citizensoldier

    M1031 with Hobart G204 Welder Help

    Pull the spark plugs and look down the cylinders with a small flashlight. See if you have corrosion on the cylinder walls or valves.. If the unit has sat for a long time water will leak down the exhaust stack and sit in the cylinders.. Put some trans fluid down them or Marvels Mystery oil and...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks