Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Confusing.. your opening paragraph says the code was "engine OR 'OUTPUT" speed sensor fault" right? So fixing the one on the engine bell housing.. which seems to be engine speed/rpm... never solved the issue; thus then it must not be engine speed/RPM sensor? Think it was Suprman's post that...
I was asking about actual harness wire numbers hooked to yours so Andy can compare with his to see if his harness has been modified or if a different harness there etc. Its just odd others can disconnect and he cant....seems somewhere something is different.
ahhh... so question is... when someone says they removed speed sensor and truck runs great.... sounds like there needs to be some clarification on which sensor.... now that we have identified 2 or is that 3 different ones?
there is also a RPM sensor that pretty sure is even on the 3116..... make sure you are not confusing the two sensors. Apologize I don't know specifically where each is. From my bad memory from what read in past I thought the speed sensor was closer to bottom of tranny on the side.
for...
On drivers side of tranny there is an aluminum plate with numbers on it. can't really see it cause it faces the chassis rails. I had to use my phone stuck up in there to take pics to read it. Use that to see what model tranny you have and let us know. Serial number is on this same plate...
lol.. you wrote it so odds are you remember everything.... for everyone else... that info was nearly two pages back and written 3 days ago thus it is not stuck in folks heads as much as it is in yours. I wish was granted with photographic memory.. but am not probably most in here don't have...
what are we looking at in this pic??... are you in drive??.... are you in neutral??..... are you in reverse??? Are you moving? If in drive.... looks normal to me if your foot is on the brake and not moving yet....... the truck's take off gear is 2nd. You will never see 1st gear unless your...
From what have read in this thread and elsewhere..... it appears the 3116 A0 trucks "engine" of course does not "need" speed sensor. at all.... the tranny on these does not "need" it either, but functions better with it. Pretty sure without speed sensor input .... the tranny program goes to a...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!