Search results

There is a detailed step by step on steel soldiers with pics. https://www.steelsoldiers.com/attachment.php?attachmentid=698713&d=1505014747

When I get my plugs for the flasher box and signal lever I will post some pics of how all wiring runs and how it ties into everything. Having trouble finding the plug for the flasher box. Also going to tear apart a 3 lever Light Switch and try to fix it.

Finally won the battle. Don’t have turns hooked up yet but I have EVERYTHING else including all BO lights.

I am positive it’s the switch. I tested it coming out of the 3 lever switch before the turn signal switch. I also tested it with a multimeter. Checked for Ohms and there is no connection. Also took a jumper wire and plugged into terminal C on the connector with 24v and the brake lights come on...

Finally have it all wired back together right and everything working. Well...almost everything. I need to get a new light switch because terminal C that sends power from the light switch when you hit the brake to the turn signal is dead. Doesn’t matter what position you have the levers in. I...

Ok problem solved. I had the wires wrong on the park brake lever. Good to go now.

I thought I finally had all my wiring issues figured out but today I noticed that the headlights only come on when the park brake is on. I looked at the wiring diagram and found that wire 67A goes from the brake warning switch to terminal C on the Protective Control Box. Inside the PCB terminal...

I know this one spent some time on a big ranch in Nebraska. They had a fleet of 15 and about 6 years ago sold most of them.

They all have a few different accessories from HMMWV model to model but I am pretty sure all humvee have the same basic harness. All military stuff is tagged with steel tags and wires are tagged the same for all military vehicles. Example: M35a2 has the exact same headlight wiring harness as a...

I found out the ground wire for the windshield wiper shorted and melted some of the wiring. It fried the ground wire but didn’t do much damage to the other two wires and didn’t hurt the blower motor wires that run right beside them at all. Also they had 12V bulbs in the tail lights (fried!!!)...

Thanks for the offers on the harness but for now I am going to repair what I have. If I start replacing wires I will have to replace everything. I need the engine harness, body harness, turn signal and headlights.... the only thing that hasn’t been cut into is the hood wiring harness. I have...

A new harness is WAY out of my budget unfortunately! Going to have to keep tracking down wires. I am using heat shrink on all connections to keep them waterproof. Going to have to redo all the s#!tty connections the previous owner did. I have been putting 12v to each pin on connectors one at a...

Didnt mean to start two. Sorry. Not the greatest with internet lol

Literally the whole wiring harness has been cut and most wires gone. How much does a wiring harness go for? What company would you recommend looking at for a new one? I would like to be able to just re wire it myself to save money but if a new harness is cheap I would go that route. Do any of...

Hi everyone I am new to the HMMWV community and need your help! I recently purchased a ‘93 AM General M1038. The previous owner cut the main wiring harness coming into the cab in front of your right knee and removed all the headlight wiring in the cab. When he cut it he only left a couple inches...