Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I replaced the line today. I decided I could not bend both new lines enough to use the original clamp that holds them in position, on the rear of the exhaust manifold.
I made a new clamp that was about 1/2" longer and wrapped it with rubber and high friction tape to keep from damaging the...
I noticed Saturday, I had oil dripping on the exhaust pipe on the drivers side.
A close inspection and I found the new oil line has moved a bit and has been touching the cab.
It has worn a hole in the new aluminum part of the line! I should have figured out a way to install that retaining...
Today I installed new oil cooler lines.
I ended up with the Napa(Balkamp) hoses listed above(the Napa hoses were actually labeled with the Dorman numbers on them). They did work but, they were definitely a challenge to get into a position where they did not touch the exhaust manifold, cab...
Did the new lines come with new seals, gasket or o-rings(whatever they seal with).
I need to replace one of my flexible oil cooler lines and I would love to walk into Napa, acting like I know what I need!
I found online,these Napa part numbers, can you confirm this is what you used and how...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!