Search results

Sorry guys I will start a new tread next time. Thanks for your help.

So I am out of luck trying to run 120 single phase with one leg and Neutral. Unless I am misunderstanding you guys :(

Got it. Thanks for the warning and info. I am somewhat confused by this statement made on Figure 2-4 The load terminals will accommodate 2-wire single phase and 4-wire, 3 phase loads. One or more single phase loads can be served alone or in combinations with 3 phase loads; but the load on any...

Got it all is well. I did not hold the circuit breaker up until the yellow light comes on. Was reading some more through the ETM manual. Regards,

The front panel gauges show the correct values . 60Hz +/- 1Hz and 120V So I do not think I have to re flash the field.

question about the main load contactor . I have voltage at a1 b1 and c1 220v But at a2 b2 c3 show 0 volts. Do I only show volts at those connections when a load is connected. I checked for open circuits, but all seems to be fine. My convenience receptacle is working fine 121v +/- 1 volt...

question about the main load contactor . I have voltage at a1 b1 and c1 220v But at a2 b2 c3 show 0 volts. Do I only show volts at those connections when a load is connected. I checked for open circuits, but all seems to be fine. My convenience receptacle is working fine 121v +/- 1 volt...

Hi Stuart, Thanks for the info. She runs, boy she sounds great. Followed starting instructions on the door, instant start. Temp is about 180 degrees with the louvers closed. Oil pressure about 58-60 PSI I am 50 but feel like a kid with a new toy HA.:) All I have to figure out is the L1 L2 L3...

Thanks Stalwart, I see you have what I am planning to get. I believe to much can never be bad. If I run at 30% of rating I should be able to avoid the wet stacking. The price was right and condition warranted the purchase. We will be living fairly deep n the desert no one around for 12 miles...

Thank you all for your input. I am sure I went to big. But my power needs will be high. Workshop welders and so on. Plus horses and corrals for nighttime roundups. So many flood lights. I am charging up the batteries as we speak. Put new fluids in and filled the Fuel filters. Maybe sometime...

Thanks, I check the site mentioned. yup she is big I love military stuff. 30KW White diesel engine 6 Cylinder :beer:

Mep-005a gen-set Hello gentlemen, New to the site. Very nice. I just bought a Gen-set from GOVLiq. Excellent shape, sweet unit. Does anyone have info on what oil to use and the cooling system fluid I was planning to use the same oil as my dodge diesel. Also can I swith the Mil spec plugs...