Search results

Well I decided to do it the way you folks did. Got the shifter and doghouse removed, found the plug and proceded to turn my proto 3/16 allen bit into rotini. About the time I thought it was going to break, the setscrew jumped a flat and that little impact broke it free. Weather permitting the...

My mistake on the firewall cutting issue. I believe that is an 800 series issue. Should have looked closer before including that comment.

Thank you for the input. The type of silver solder I was considering is very strong. We use it to make extended drill bits, butt solder 1/2" drill rod to a 1/2" bit. Routinely push that through 4" of steel, never had one fail at the joint. That said, tig welding is an option for me also, and I...

Jeepsinker, sorry, I assumed too much. this is dealing with the single line fuel delivery to the front cylinder head on the nhc 250. the "standard mod" removes a plug in the rear cylinder head, and ads a second fuel feed line from a tee at the pump. Search dual fuel line, and you will find the...

So, I was wondering if anyone has attempted the dual feed mod using the crossover tubes as a feed point instead of the plugs in the ends of the cylinder heads. I would think that if dual feed from the ends is an improvement, wouldn't dual feed from the centers be even better. This way at least I...