Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Now that I've driven it around with the nv4500 and 4.56 I'd say 4.10s would be perfect.
I can't stay in 5th for any hill right now anyways, so dropping to 4.10s isn't going to make a difference, except in flat cruising.
Found a few posts on thedieselpage about some people getting 20+ with nv4500 and 3.73/4.10.
One thing I did not mention is I do want to change to a non clutch limited slip diff. Something around the truetrac design, which would require replacing the carrier unit anyways.
If 3.73s are too tall...
Just had a thought, I do want to eliminate the clutch based limited slips
So blazer with th400, 3.08 gears can cram 20mpg.
I dont see why I couldnt at least match that with the overdrive and closer gears in a m1008. Especially since a blazer with th400 doesnt have lockup, so theres some...
I dont know of any truck I could buy for a reasonable price that has a 6.2/6.5 diesel, nv4500 that wasnt built for towing or off roading.
I did originally look at civi trucks, but in my area, they were not very good prices and none were diesel.
The cucv was a good base platform to build exactly...
I got 24mpg (average over a tank) with 6.2 and 4l80. Its possible, not at super speeds, but chuggin around at 50-55. These have better aero than a humvee.
Makes sense, but my only reservation about 37s is the impact they can have on mpg. So a new math problem...
Theoretical MPG for: 4.56 + 0.73 OD + 37s
or
Theoretical MPG for: 3.73 + 0.73 OD + 33s
Assuming flat terrain freeway cruising.
I know mpg isnt something a 5/4 ton 80s truck is good at...
When I had my humvee with the 4l80, it was pulling around 2100 at around 62mph. This rpm seems a bit high for these engines, they always seemed to pull better below 2000, so thats why I would aim for 1800 around 65. (I do plan on moving a 6.5 eventually)
I know 3.73 plus that 0.73 is a pretty low rpm, but even if I didnt have the 3.73, would 4.56 and 0.73 be able to make it up a mountain pass?
My point is, that if in either gear ratio, overdrive cant be used when hill climbing, then both ratios would require shifting to 4th gear for any grade...
33s weigh less, and 3.73 coupled with 0.73 overdrive drops the cruise rpm very low.
Not to mention 33s are easier to balance and cost less.
Not sure how the math works out, but wouldn't the extra weight of 37s bog the 6.2 more than 33s.
Considering m1008s have 3.08 gears I don't think 3.73 is...
This is on a stock m1028. Currently has 31" tires.
I don't want to totally crunch the 6.2s HP or potential mpg, so 37s are too much.
I was mainly asking what brand people seem to think is a better quality product for these trucks, Yukon and Spicer both seem very well built, just gauging the room.
I was reading that the entire carrier needs to be swapped to the 4.10 and lower.
If that is so what do people recommend for new carrier to fit the 3.73 ring and pinion, I'm leaning between either Spicer or Yukon, unless theres a better price on another brand.
What do the costs end up being for...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!