Search results

Correct Sent from my SAMSUNG-SM-G890A using Tapatalk

It actually has a seperate out flow that lets the pressure free flow through when not using it. Sent from my SAMSUNG-SM-G890A using Tapatalk

So i finally looked hard at my pump and it says right on it that its vane pump not a gear pump Sent from my SAMSUNG-SM-G890A using Tapatalk

I dont think itll be an issue. Its only like 14gpm at idle. Even 30gpm isnt that much. New tractors are up in the ballpark of 50gpm on high flow models. Our john deeres from the early nineties are right at about 30gpm. I would say side by side running my dump trailer the tractor is just a smidge...

So i picked up that valve today. But i have one more question. When i plumb it for power beyond do i need a return line on that valve as well or just the power beyond for out flow? Sent from my SAMSUNG-SM-G890A using Tapatalk

Sounds like quite "the pile". The shop i used to work it has one sitting on a shelf. Its been there for at least 6 years that i know of. Im gonna see if i can get a deal on it. Its a prince rd5000 series. Just have to get a power beyond plug to convert it. Its already open center. Sent from my...

I have one of those selector valves plumbed in already. I did it to have a rear remote for my dump trailer. I wouldnt even consider what i asked but i have a pump/valve/reservoir that came with the hoist. I did stumble upon what i need to do it right. A 3 spool control valve. I can eliminate the...

Ok what if i put a selector valve in and run a separate circuit. I have a 15 gallon reservoir im gonna try and tie into the original. Might tie all 3 together not sure yet. The factory control valve is open center correct. which means oil flows through until the lever is moved then it redirects...

So i know this is an old thread but i have a m925 and im putting a hoist under the bed. It came with a tank that has a built in pump so im thinking of running that pump with a hydraulic motor of the oribjginal pump. A little redundant i know but it has the right valve and everything all in one...