-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
Greasing a Deuce
reference post 13: There are 3 grease points for the clutch and brake pedal mount. There are 2 more high on each side of the bell housing for the clutch throwout cross shaft.If thry have not been serviced recently they will be hard to find without a work light. Attached pic shows at least 2 of... -
Greasing a Deuce
If the grease in the pin is dried out, remove the grease fitting and throw a little heat at it. If you have seen one of these pins out of the truck there is a grease passage down the center and several smaller holes that radiate off it to distribute the grease in the bushing. These will clog... -
Greasing a Deuce
Most grease points like tie rod ends, spring eyes, u-joints and such are pumped until you see fresh grease oozing out. Do not overgrease the upper and lower king pins as the bushings are not that big and if you fill the steering knuckle up with grease the truck will be difficult to steer in the... -
Greasing a Deuce
Don't make a move without a lubrication order. A cargo truck has something on the order of 39 grease points, more if it has a winch. The amount of grease they take is, in part, a function of how long it has been since they last saws the attention of the grease gun. Some of these fittings are not...