Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
It has minimal blow by. No worse then the first day I got the truck. Coolant system is not being pressurized. No oil or coolant mixing. It is huffing out the intake so it sounds like compression is being forced back into intake. Could be a bad valve or the head or head gasket. I’ll pull it...
I removed the valve cover and all the springs are good. I bared the motor over and they all feel about the same as far as lash goes nothing sloppy or to tight. I ordered the head gasket set. So I’ll see what things look like when I get it apart. This truck gets used a lot in the farm. I...
So my compression tester didn’t quite work it leaked past the threads were the injector nozzle would of sealed it. I took the lines of if 5 and 6. Then hooked them up so I could watch the injector lbs spray. They both adomized real nice I swapped them from 5 and 6 and the spray was the same...
I’ll Play with line more today. It always smoked black. I bypassed the fuel density regulator and it gets good boost. There is fuel there but didn’t seem like it sprays out like the other cylinders
It did seam like there wasn’t as much fuel got g to the number 5 injector. It’s been a year since I worked on it last. But changing the rotors head made no difference. I Took it apart and cleaned it first. I wonder if the head gasket is blown out between two cylinders or an oil galley...
Yes. A good amount of blow by. It does push oil out of the front head gasket under a heavy load. It smokes like **** but it always has. It is worse cause of the skipping. I just made a compression tester out of the old injector so I’ll test it to see if it can’t fire cause it has no...
Help. My m35a2 with the Hercules multifuel is skipping badly. I replaced the fuel filters and made sure the electric fuel pump is working and there is plenty of fuel going to the injection pump. I cracked the injector lines and it seamed like number 5 cylinder was dead. So I replaced that...