Search results

mep 003a output split bolt terminal connectors What torque or how to tighten the large nuts on the split bolt output terminals. Looking thru tm couldn't find anything on how to tighten the nuts to clamp the wires. For the bottom nut seems like a thin open end wrench to fit between the wire and...

What TM has trip point and connection info? Charlie mep 003A

If one would connect a load between L1 an L0 that could draw 105 amps what would be the max amps in the line? Agree nameplate states generator puts out 104/52 amps for 120/240 volt 1 phase but what amps are the gen. circuit breakers good for? Charlie mep 003A

Ok for 240v but what about 120v? Charlie mep 003A

mep 003A house hookup amp rating Thanks to Ike and Gary on comments. Ike, you mentioned that amp rating for 10kw gen is 52 amp. How do you arrive at 52 amp, say for 120v. Iv'e looked thru tm but didn't find what amp the gen. breakers are rated for. Also read the thread about trying to get a...

mep 003A house hookup amp rating House is all electric except for oil heat. What size amp breakers and wiring should be used when connecting the mep 003A to house for emergency power outages. Will want to run furnace, refrigerators, maybe one burner on electric range, lights and tv...

Thanks for the info. Ah.... that mighty tm, how does one get along without it?? I'm about ready to hook gen. to house , the interlock system seems like the way. One source says if you buy the interlock device from the panel manufacturer it's approved, in my case the panel is square D. Will...

Should the gen speed, once set to get 60 hz (120 v 1phase) at about 500 watt load, drift down about 0.5 hz when loaded to 1700 watts? Will this amount of shift damage anything in the house if gen. is connected to house? I understand that computers don't like shifting away from 60 hz. What shift...